Addonics Technologies ADSA3GPX8-4E Uživatelský manuál stáhnout pdf

BIOS Jumper (J4)

Enable BIOS (1-2) – RAID firmware is active

Disable BIOS (2-3) – Base firmware is active

By default, the BIOS jumper is set to enable BIOS (1-2) for the ADSA3GPX8-4E. This means that when

you boot into a system, after POST, the RAID BIOS of the controller card with the attach devices shows

up. The RAID driver needs to be installed.

If the BIOS jumper is set to disable BIOS (2-3) when you boot into a system, after POST, the RAID BIOS

of the controller card does NOT show up. The BASE driver needs to be installed.

T E C H N O L O G I E S

User Guide

4 Port eSATA RAID5/JBOD

PCI-E 8x Controller

(ADSA3GPX8-4E)

BIOS Jumper (J4)

Fan

Hard Drive Activity LED

Jumper Connections

eSATA Ports

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

v4.1.11

1 2

User Guide 1

Shrnutí obsahu

Strany 1 - User Guide

BIOS Jumper (J4)Enable BIOS (1-2) – RAID firmware is activeDisable BIOS (2-3) – Base firmware is activeBy default, the BIOS jumper is set to enable BI

Strany 2

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/Software Installation for R

Komentáře k této Příručce

Žádné komentáře

Addonics Technologies ADSA3GPX8-4E Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Řadiče RAID Addonics Technologies ADSA3GPX8-4E. Addonics Technologies ADSA3GPX8-4E User's Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Řadiče RAID Addonics Technologies ADSA3GPX8-4E